Van & Fourgon

Camping-car & Caravane

We've found

Close

Home

BACK to Accessories RV

BACK to Maintenance - Recreational vehicles

BACK to Oil, grease, products - Recreational vehicles

BACK to Assembly products - Recreational vehicles

LOCTITE 574 joint sealing compound for flat surfaces with low clearance - tube - 250ml

Only 3 in stock

LOCTITE 574 joint sealing compound for flat surfaces with low clearance - tube - 250ml

Qty :

105,06 € ATI

Only 3 in stock

105,06 € ATI

Product description

Customer review

Relay Mondial Relay - 48/72h 4,90€.

Relay La Poste - 48/72h 5,90€.

Colissimo - 48/72h 6,90€.

Chronopost - 24h 10,90€.

TNT - 24/48h 8,90€.

Sent by ROADLOISIRS on: Monday, May 6, 2024

Description Product

Customer review

Your questions

Description Product

Details about : LOCTITE 574 joint sealing compound for flat surfaces with low clearance - tube - 250ml

LOCTITE 574 Joint Sealant (250ml) seals low clearance joints between rigid or machined metal surfaces or joint faces . The product cures when confined in the absence of air between metal surfaces with low clearance. It is resistant to low pressure immediately after assembly. This instajoint is mainly used when assembling gearboxes, engine blocks, etc. The thixotropic nature of the paste prevents migration or creep of the product after application.

WARNING: This product is not recommended for use on plastics, especially thermoplastics!

ADVANTAGES :
- Fast-drying.
- Single component, quick and easy to apply.
- Produces an instant low-pressure seal once fully cured.
- Excellent resistance to water and glycol.
- High resistance to oil.
- Operating temperature range : -55 to 150°C
- Chemical compound: Methacrylate
- Fixing time on steel: 15 min
- Fixing time on aluminum: 45 min

USE COUNCIL:
- For best performance, surfaces must be clean and grease-free.
- The product is designed for joint surfaces with a gap of up to 0.25 mm.
- Apply the product as a bead by hand or by silk-screen printing on one of the surfaces.
- Low pressure (<0.5 MPa) can be used to test the seal immediately after assembly and before curing.
- Sealing surfaces should be tightened as soon as possible after closing, to avoid the risk of forming excess thicknesses.

Please observe the usual precautions.

Original reference:

LOCTITE 574

Technical caracteristics

Mark

LOCTITE

Composition or quality

Waterproofing

Color

Orange

Type

UV fluorescent

Capacity (ml)

250

Pdf

Customer review

No commentary about the product

TRUSTED SHOPS

With Trusted Shops, we can improve directly thanks to your comments posted on the ROADLOISIRS website

Your questions

You can't find the answers you need?

Need help? - FAQ

Contact us

Ask users about the product

My pseudo*

My question

Add pictures

(pptional)

By checking this box, you acknowledge to have read and accepted the following general conditions of use. You authorise Mecatechnic to publish your question and that your handle appears on the asked question

Thank you, your question has been taken into account

* Required field, it will appear with your question.

** Your email address won't be used for commercial purposes but only for the community and the customer service which will be able to contact you to help for the treatment of your request.

Under the Data Protection Act of 6 January 1978, you have a right to access
and rectify data concerning you. To exercise your right, just write us
indicating your name and email address.

Telephone customer service is open from Monday to Friday: 9am to 6pm

Contact us

6 allée Saint Eloi

59118 WAMBRECHIES - France

+33 320 683 800

Know us better

Security and payment

Need help

Know us better

Security and payment

Need help

Secure payment :