Van & Fourgon

Camping-car & Caravane

We've found

Close

Marques

3en1 (5) Accumate (2) Alde (8) Alko (99) Aragon (1) Ate (2) Auto glym (8) Autosol (1) Bancarel (4) Bardahl (16) Barwing (13) Bbt (1) Belgom (32) Berker (28) Blazecut (2) Bosch (5) Brink (9) Brunner (10) Cadac (6) Caliber (22) Campingaz (4) Campingaz new (2) Carpro (2) Carysan (11) Castrol (1) Cbe (58) Chantal (25) Cibie (1) Climair (41) Comet (57) Dei (2) Dekalin (19) Dometic (366) Dometic new (6) Driverite firestone (18) Duvalay (72) Dynamat (3) Efoy (11) Elring (1) Elsan (2) Emuk (3) Etai (1) Euramax (3) Facom (2) Fawo (3) Febi (2) Ferodo (1) Fiamma (1353) Fiamma new (14) Flextrash (12) Froli (8) Gok (15) Hella (67) Heos (9) Heosafe (18) Hindermann (99) Htd (16) Isabella (7) Jaeger (4) Jokon (92) Katadyn (12) Linnepe (2) Linnepe new (1) Loctite (18) Matt chem (14) Maxxair (2) Mecacyl (2) Meguiars (12) Mellerud (6) Milenco (78) Mottez (4) Motul (27) Neoclean (22) Ngk (12) Nite ize (51) Omnia.png (6) Optimate (18) Outwell (6) Polyplastic (13) Polyplastics (2) Project 2000 (1) Project2000 (3) Quipon (12) Reich (176) Remis (137) Remis new (8) Ring (1) Samco sport (1) Scheiber (18) Securon (1) Shurflo (22) Sika (39) Sika new (1) Sinto (10) Sog (13) Sts (12) Teleco (3) Teroson (10) Thermicamp roof (54) Thermo racing (3) Thermoval integral (14) Thetford (246) Thetford new (5) Thitronik (1) Thule (311) Thule new (11) Titan (1) Toolatelier (33) Towcar (4) Truma (212) Unil opal (3) Unilopal (2) Valeo (1) Vdo (1) Vechline power (6) Vechline tech (6) Vechline-power (1) Vw classic parts (9) Wd40 (3) Webasto (2) Wenko (4) Westfield (2) Whale (2) Winterhoff (2) Wipac (3) Wm aquatec (10) Xzent (1) Yachticon (8) Zadi (112)

Toutes les pièces de la marque fiamma_new

Trier par

Display :

ref : CP10969

Threaded base for CARRY BIKE T4 Fiamma - 98656-292

Only 2 in stock

14,00 € ATI

This threaded base adjusts the bike carrier, positioned as a stop on the bumper of your VW Transporter T4. It fits Fiamma bike racks part no. 02094-18A - 02093H01.
Part N° 11 on the attached diagram.
Sold individually.

Ref Fiamma: 98656-292

Learn more

ref : CS12465

Left foot joint for F45I Fiamma blind - 98655-054

Only 2 in stock

18,10 € ATI

This Left foot joint is a spare and replacement part for the Fiamma F45I 250- 400 awning.
Side: left.

Fiamma Ref : 98655-054

Learn more

ref : CP10867

Caravan bike carrier CARRY BIKE XL A PRO 200 Grey FIAMMA - 2 bikes - restyling 2023

Out of stock from our supplier

399,00 € ATI

More elegant and stylish, this new version of the CARRY BIKE XLA Pro 200 Fiamma bike carrier is sure to please. Suitable for caravans with standard 342 mm minimum boom, it is designed for up to 2 bikes . It attaches to the drawbar positioned at the front of the caravan.

Features:
- Foldable , hinged top for easy access to the trunk.
- Protective foam: to protect the bike from impact with the rack structure.
- No-drill mounting on standard booms with minimum dimensions of 342 mm.
- Access to the gas-powered trunk is possible without disassembling the bikes.
- Resistant: aluminum uprights and stainless steel screws.
- Safety lock: device for locking the rail-carrying structure during transport.

Supplied with:
- 2 Plus rails.
- 2 strip straps (1 long and 1 short) for securing bikes.
- 1 Bike Block Pro 2 arm.
- Mounting brackets.
- Color: silver/black.
Max. load weight: 50 kg.

Compositions/ dimensions:
- Anodized aluminum uprights.
- Overall dimensions: Width: 128 cm. Depth: 38 cm. Height: 100 cm.
- Weight: 9.4 kg.

Ref Fiamma 02096-32

For caravans with short jib. To be attached to the drawbar (342 mm min.). For up to 2 bikes (no possibility of adding a 3rd bike).
Bike Block arm frame attachment can be turned through 90°. Do not hesitate to rotate this attachment to adapt it to the position of the frame. Not suitable for electric bikes.
Also available in Deep Black (100% black).

Learn more

Notify me

€

Apport :

€

+ 2 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

€

Apport :

€

+ 3 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

Crédit d'une durée de 2 ou 3 mois sans assurance avec apports obligatoires, réservés aux particuliers. Sous réserve d'acceptation par Oney Bank. Vous disposez d'un délai de 14 jours pour renoncer à votre crédit. Oney Bank - SA au capital de 51 286 585 euros - 40 Avenue de Flandre 59170 Croix - RCS Lille Metropole - 546 380 197 - n° Orias 07 023 261 www.orias.fr

ref : CP10894

Carry Bike Frame

On order

1 197,90 € ATI

Discover this new restyled 2023 version for the CARRY BIKE FRAME bike carrier for VW CRAFTER II series / MAN TGE (= 2017 - H3 / H4) after 2016. It is offered here with its KIT FRAME holder for VW CRAFTER II. Its sturdy stainless steel frame allows you to transport your bikes with complete peace of mind on your van. All you need to do is use the vehicle's original mounting points. In addition to its ease of installation, you'll benefit from other advantages:
- The rear door can be opened, even with bikes mounted on the carrier.
- 3 position levels for the rack structure (standard, intermediate or low) to facilitate bike mounting/dismounting.

Suitable for:
- 2 conventional (non-electric) bikes as standard and up to 3 bikes max. with optional accessories.
OR
- 2 electric E-Bikes max.
You'll appreciate its elegant styling in a silver-gray finish.

CARRY BIKE FRAME features:
- Rack can be used in 3 positions: standard, intermediate or low, for easy bike loading.
- The doors can be opened with the bike rack installed.
- Material resistance: anodized aluminum.
- Maximum load: bike rack: 50 Kg; rail: 15 Kg.
- Rail spacing: 15 cm.
- Vertical wheelbase: 168 cm.
- Installation safety: using vehicle hinges.
- Rack Holder : safety system for locking the rail-holder structure.
-Bike-Block: bike -blocking devices.
- Rail Plus: new design for greater resistance to torsion and bending.
- Quick Lock: fast, secure locking of wheel to rail - Anodized aluminum uprights.
- Finish: silver.
- Overall dimensions (WxD): 128 x 60 cm.
- Weight: 9.4 Kg.

Supplied with: 2 premium rails, 1 Bike-Block Pro S1, 1 Bike-Block Pro S3,, Frame Kit for VW CRAFTER II after 2016

Features of the KIT FRAME for VW CRAFTER II:
- Reinforced attachment: use of vehicle hinges.
- Anodized aluminum frame.
- Finish: silver.
- Overall dimensions:
Carry Bike Frame: Width: 96 cm. Height: 136 cm.
- Weight: 10.8 Kg.

FIAMMA Code: 08753-03 Kit Frame VW CRAFTER II 02096-35- Carry Bike Frame

Not suitable for vehicles with 270° hinge system.
For mounting a 3rd bike: optional 1 Bike Block Pro 2 arm and 1 Plus rail.
Please note: the Carry Bike rack must be installed on the right-hand door of the vehicle, and the ladder on the left-hand door. The Bike Block arm's frame attachment can be turned through 90°. Do not hesitate to rotate this bracket to adapt it to the position of the frame.
The License Plate Carrier Fiamma (available as an option) is recommended.

Learn more

€

Apport :

€

+ 2 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

€

Apport :

€

+ 3 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

Crédit d'une durée de 2 ou 3 mois sans assurance avec apports obligatoires, réservés aux particuliers. Sous réserve d'acceptation par Oney Bank. Vous disposez d'un délai de 14 jours pour renoncer à votre crédit. Oney Bank - SA au capital de 51 286 585 euros - 40 Avenue de Flandre 59170 Croix - RCS Lille Metropole - 546 380 197 - n° Orias 07 023 261 www.orias.fr

ref : CP10893

Carry Bike Frame DEEP BLACK

On order

1 242,00 € ATI

Discover this new restyled 2023 version of the CARRY BIKE FRAME DEEP BLACK forMercedesSPRINTER sold after 2017,with high roof (HD) or super high roof (SHD). It is offered here with its KIT FRAME support for Mercedes SPRINTER. Its sturdy stainless steel frame allows you to transport your bikes with complete peace of mind on your van. All you need to do is use the vehicle's original mounting points. In addition to its ease of installation, you'll benefit from other advantages:
- The rear door can be opened, even with bikes mounted on the carrier.
- 3 position levels for the rack structure (standard, intermediate or low) to facilitate bike mounting/dismounting.

Suitable for:
- 2 conventional (non-electric) bikes as standard and up to 3 bikes max. with optional accessories.
OR
- 2 electric E-Bikes max.
You'll appreciate its elegant styling in DEEP BLACK finish.

CARRY BIKE FRAME features:
- Rack can be used in 3 positions: standard, intermediate or low, for easy bike loading.
- The doors can be opened with the bike rack installed.
- Material resistance: anodized aluminum.
- Maximum load: bike rack: 50 Kg; rail: 15 Kg.
- Rail spacing: 15 cm.
- Vertical wheelbase: 168 cm.
- Installation safety: using vehicle hinges.
- Rack Holder : safety system for locking the rail-holder structure.
-Bike-Block: bicycle locking devices.
- Rail Plus: new design for greater resistance to torsion and bending.
- Quick Lock: fast, secure locking of wheel to rail - Anodized aluminum uprights.
- Finish: DEEP BLACK (100% black)
- Overall dimensions (WxD): 128 x 60 cm.
- Weight: 9.4 Kg.

Supplied with: 2 premium rails, 1 Bike-Block Pro S1 DEEP BLACK, 1 Bike-Block Pro S3 DEEP BLACK, Frame Kit for Fiat Ducato > 2006.

Features of KIT FRAME for Mercedes SPRINTER
- Reinforced attachment: use of vehicle hinges.
- Anodized aluminum frame.
- Finish: silver.
- Overall dimensions:
Carry Bike Frame: Width: 96 cm. Height: 136 cm.
- Weight: 10.8 Kg.

FIAMMA Code: 08753-02 Kit Frame Sprinter 02096-35A- Carry Bike Frame Deep Black

Not suitable for vehicles with 270° hinge system.
For mounting a 3rd bike: optional 1 Bike Block Pro 2 Deep Black arm and 1 Plus Deep Black rail.
Please note: the Carry Bike rack must be installed on the right-hand door of the vehicle, and the ladder on the left-hand door. The Bike Block arm frame mounting can be turned through 90°. Do not hesitate to rotate this bracket to adapt it to the position of the frame.
The License Plate Carrier Fiamma (available as an option) is recommended.

Learn more

€

Apport :

€

+ 2 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

€

Apport :

€

+ 3 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

Crédit d'une durée de 2 ou 3 mois sans assurance avec apports obligatoires, réservés aux particuliers. Sous réserve d'acceptation par Oney Bank. Vous disposez d'un délai de 14 jours pour renoncer à votre crédit. Oney Bank - SA au capital de 51 286 585 euros - 40 Avenue de Flandre 59170 Croix - RCS Lille Metropole - 546 380 197 - n° Orias 07 023 261 www.orias.fr

ref : CP10895

Carry Bike Frame

On order

1 242,00 € ATI

Discover this new restyled 2023 version for the CARRY BIKE FRAME bike carrier for VW CRAFTER II series / MAN TGE (= 2017 - H3 / H4) after 2016. It is offered here with its KIT FRAME holder for VW CRAFTER II. Its sturdy stainless steel frame allows you to transport your bikes with complete peace of mind on your van. All you need to do is use the vehicle's original mounting points. In addition to its ease of installation, you'll benefit from other advantages:
- The rear door can be opened, even with bikes mounted on the carrier.
- 3 position levels for the rack structure (standard, intermediate or low) to facilitate bike mounting/dismounting.

Suitable for:
- 2 conventional (non-electric) bikes as standard and up to 3 bikes max. with optional accessories.
OR
- 2 electric E-Bikes max.
Enjoy classic styling in DEEP BLACK finish.

CARRY BIKE FRAME features:
- Rack can be used in 3 positions: standard, intermediate or low, for easy bike loading.
- The doors can be opened with the bike rack installed.
- Material resistance: anodized aluminum.
- Maximum load: bike rack: 50 Kg; rail: 15 Kg.
- Rail spacing: 15 cm.
- Vertical wheelbase: 168 cm.
- Installation safety: using vehicle hinges.
- Rack Holder : safety system for locking the rail-holder structure.
-Bike-Block: bike -blocking devices.
- Rail Plus: new design for greater resistance to torsion and bending.
- Quick Lock: fast, secure locking of the wheel to the rail - aluminum upright .
- Finish: Deep Black
- Overall dimensions (WxD): 128 x 60 cm.
- Weight: 9.4 Kg.

Supplied with: 2 premium DEEP BLACK rails, 1 Bike-Block Pro S1 DEEP BLACK, 1 Bike-Block Pro S3 DEEP BLACK,, Frame Kit for VW CRAFTER II after 2016

Features of the KIT FRAME bracket for VW CRAFTER II:
- Reinforced attachment: use of vehicle hinges.
- Aluminum frame.
- Finish: aluminium grey.
- Overall dimensions:
Carry Bike Frame: Width: 96 cm. Height: 136 cm.
- Weight: 10.8 Kg.

FIAMMA Ref: 08753-03 Kit Frame VW CRAFTER II 02096-35A- Carry Bike Frame DEEP BLACK

Not suitable for vehicles with 270° hinge system.
For mounting a 3rd bike: optional 1 Bike Block Pro 2 arm and 1 Plus rail.
Please note: the Carry Bike rack must be installed on the right-hand door of the vehicle, and the ladder on the left-hand door. The Bike Block arm's frame attachment can be turned through 90°. Do not hesitate to rotate this bracket to adapt it to the position of the frame.
The License Plate Carrier Fiamma (available as an option) is recommended.

Learn more

€

Apport :

€

+ 2 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

€

Apport :

€

+ 3 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

Crédit d'une durée de 2 ou 3 mois sans assurance avec apports obligatoires, réservés aux particuliers. Sous réserve d'acceptation par Oney Bank. Vous disposez d'un délai de 14 jours pour renoncer à votre crédit. Oney Bank - SA au capital de 51 286 585 euros - 40 Avenue de Flandre 59170 Croix - RCS Lille Metropole - 546 380 197 - n° Orias 07 023 261 www.orias.fr

ref : CW11554

Valve fitting for Roll Tank Fiamma

Available the 13/05/2024

17,00 € ATI

The valve connector is an accessory and spare part for Fiamma ROLL TANK mobile tanks .

Ref Fiamma : 98669-001

Learn more

ref : CS13076

Label for blind SLIDE OUT Black Fiamma réf: 98673-166

Out of stock from our supplier

11,00 € ATI

The headband label is a replacement accessory for Fiamma SLIDE OUT blinds.

Ref Fiamma: 98673-166

Learn more

Notify me

ref : CS13077

Label for blind SLIDE OUT Deep Black Fiamma réf: 98673-167

Out of stock from our supplier

11,00 € ATI

The headband label is a replacement accessory for Fiamma SLIDE OUT Deep Black blinds.

Ref Fiamma: 98673-167

Learn more

Notify me

ref : CS13081

Fastening kit for Rafter on F45 IL Fiamma awning headband - Ref: 98655-026

Out of stock from our supplier

9,00 € ATI

This mounting hardware is a spare part for Fiamma F45 IL Fiamma blinds.

Ref Fiamma: 98655-026

Learn more

Notify me

ref : CS13086

Rafter bracket for F45 IL Fiamma awning box - Ref: 98655-687

Out of stock from our supplier

9,90 € ATI

This bracket is a spare part for Fiamma F45 IL Fiamma blinds.

Ref Fiamma: 98655-687

Learn more

Notify me

Only 2 in stock

ref : CP10969

Threaded base for CARRY BIKE T4 Fiamma - 98656-292

14,00 € ATI

Learn more

Threaded base for CARRY BIKE T4 Fiamma - 98656-292

This threaded base adjusts the bike carrier, positioned as a stop on the bumper of your VW Transporter T4. It fits Fiamma bike racks part no. 02094-18A - 02093H01.
Part N° 11 on the attached diagram.
Sold individually.

Ref Fiamma: 98656-292

14,00 € ATI

Summary of product

Only 2 in stock

ref : CS12465

Left foot joint for F45I Fiamma blind - 98655-054

18,10 € ATI

Learn more

Left foot joint for F45I Fiamma blind - 98655-054

This Left foot joint is a spare and replacement part for the Fiamma F45I 250- 400 awning.
Side: left.

Fiamma Ref : 98655-054

18,10 € ATI

Summary of product

Out of stock from our supplier

ref : CP10867

Caravan bike carrier CARRY BIKE XL A PRO 200 Grey FIAMMA - 2 bikes - restyling 2023

399,00 € ATI

Notify me

Learn more

Caravan bike carrier CARRY BIKE XL A PRO 200 Grey FIAMMA - 2 bikes - restyling 2023

More elegant and stylish, this new version of the CARRY BIKE XLA Pro 200 Fiamma bike carrier is sure to please. Suitable for caravans with standard 342 mm minimum boom, it is designed for up to 2 bikes . It attaches to the drawbar positioned at the front of the caravan.

Features:
- Foldable , hinged top for easy access to the trunk.
- Protective foam: to protect the bike from impact with the rack structure.
- No-drill mounting on standard booms with minimum dimensions of 342 mm.
- Access to the gas-powered trunk is possible without disassembling the bikes.
- Resistant: aluminum uprights and stainless steel screws.
- Safety lock: device for locking the rail-carrying structure during transport.

Supplied with:
- 2 Plus rails.
- 2 strip straps (1 long and 1 short) for securing bikes.
- 1 Bike Block Pro 2 arm.
- Mounting brackets.
- Color: silver/black.
Max. load weight: 50 kg.

Compositions/ dimensions:
- Anodized aluminum uprights.
- Overall dimensions: Width: 128 cm. Depth: 38 cm. Height: 100 cm.
- Weight: 9.4 kg.

Ref Fiamma 02096-32

For caravans with short jib. To be attached to the drawbar (342 mm min.). For up to 2 bikes (no possibility of adding a 3rd bike).
Bike Block arm frame attachment can be turned through 90°. Do not hesitate to rotate this attachment to adapt it to the position of the frame. Not suitable for electric bikes.
Also available in Deep Black (100% black).

399,00 € ATI

Summary of product

€

Apport :

€

+ 2 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

€

Apport :

€

+ 3 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

Crédit d'une durée de 2 ou 3 mois sans assurance avec apports obligatoires, réservés aux particuliers. Sous réserve d'acceptation par Oney Bank. Vous disposez d'un délai de 14 jours pour renoncer à votre crédit. Oney Bank - SA au capital de 51 286 585 euros - 40 Avenue de Flandre 59170 Croix - RCS Lille Metropole - 546 380 197 - n° Orias 07 023 261 www.orias.fr

On order

ref : CP10894

Carry Bike Frame

1 197,90 € ATI

Learn more

Carry Bike Frame

Discover this new restyled 2023 version for the CARRY BIKE FRAME bike carrier for VW CRAFTER II series / MAN TGE (= 2017 - H3 / H4) after 2016. It is offered here with its KIT FRAME holder for VW CRAFTER II. Its sturdy stainless steel frame allows you to transport your bikes with complete peace of mind on your van. All you need to do is use the vehicle's original mounting points. In addition to its ease of installation, you'll benefit from other advantages:
- The rear door can be opened, even with bikes mounted on the carrier.
- 3 position levels for the rack structure (standard, intermediate or low) to facilitate bike mounting/dismounting.

Suitable for:
- 2 conventional (non-electric) bikes as standard and up to 3 bikes max. with optional accessories.
OR
- 2 electric E-Bikes max.
You'll appreciate its elegant styling in a silver-gray finish.

CARRY BIKE FRAME features:
- Rack can be used in 3 positions: standard, intermediate or low, for easy bike loading.
- The doors can be opened with the bike rack installed.
- Material resistance: anodized aluminum.
- Maximum load: bike rack: 50 Kg; rail: 15 Kg.
- Rail spacing: 15 cm.
- Vertical wheelbase: 168 cm.
- Installation safety: using vehicle hinges.
- Rack Holder : safety system for locking the rail-holder structure.
-Bike-Block: bike -blocking devices.
- Rail Plus: new design for greater resistance to torsion and bending.
- Quick Lock: fast, secure locking of wheel to rail - Anodized aluminum uprights.
- Finish: silver.
- Overall dimensions (WxD): 128 x 60 cm.
- Weight: 9.4 Kg.

Supplied with: 2 premium rails, 1 Bike-Block Pro S1, 1 Bike-Block Pro S3,, Frame Kit for VW CRAFTER II after 2016

Features of the KIT FRAME for VW CRAFTER II:
- Reinforced attachment: use of vehicle hinges.
- Anodized aluminum frame.
- Finish: silver.
- Overall dimensions:
Carry Bike Frame: Width: 96 cm. Height: 136 cm.
- Weight: 10.8 Kg.

FIAMMA Code: 08753-03 Kit Frame VW CRAFTER II 02096-35- Carry Bike Frame

Not suitable for vehicles with 270° hinge system.
For mounting a 3rd bike: optional 1 Bike Block Pro 2 arm and 1 Plus rail.
Please note: the Carry Bike rack must be installed on the right-hand door of the vehicle, and the ladder on the left-hand door. The Bike Block arm's frame attachment can be turned through 90°. Do not hesitate to rotate this bracket to adapt it to the position of the frame.
The License Plate Carrier Fiamma (available as an option) is recommended.

1 197,90 € ATI

Summary of product

€

Apport :

€

+ 2 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

€

Apport :

€

+ 3 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

Crédit d'une durée de 2 ou 3 mois sans assurance avec apports obligatoires, réservés aux particuliers. Sous réserve d'acceptation par Oney Bank. Vous disposez d'un délai de 14 jours pour renoncer à votre crédit. Oney Bank - SA au capital de 51 286 585 euros - 40 Avenue de Flandre 59170 Croix - RCS Lille Metropole - 546 380 197 - n° Orias 07 023 261 www.orias.fr

On order

ref : CP10893

Carry Bike Frame DEEP BLACK

1 242,00 € ATI

Learn more

Carry Bike Frame DEEP BLACK

Discover this new restyled 2023 version of the CARRY BIKE FRAME DEEP BLACK forMercedesSPRINTER sold after 2017,with high roof (HD) or super high roof (SHD). It is offered here with its KIT FRAME support for Mercedes SPRINTER. Its sturdy stainless steel frame allows you to transport your bikes with complete peace of mind on your van. All you need to do is use the vehicle's original mounting points. In addition to its ease of installation, you'll benefit from other advantages:
- The rear door can be opened, even with bikes mounted on the carrier.
- 3 position levels for the rack structure (standard, intermediate or low) to facilitate bike mounting/dismounting.

Suitable for:
- 2 conventional (non-electric) bikes as standard and up to 3 bikes max. with optional accessories.
OR
- 2 electric E-Bikes max.
You'll appreciate its elegant styling in DEEP BLACK finish.

CARRY BIKE FRAME features:
- Rack can be used in 3 positions: standard, intermediate or low, for easy bike loading.
- The doors can be opened with the bike rack installed.
- Material resistance: anodized aluminum.
- Maximum load: bike rack: 50 Kg; rail: 15 Kg.
- Rail spacing: 15 cm.
- Vertical wheelbase: 168 cm.
- Installation safety: using vehicle hinges.
- Rack Holder : safety system for locking the rail-holder structure.
-Bike-Block: bicycle locking devices.
- Rail Plus: new design for greater resistance to torsion and bending.
- Quick Lock: fast, secure locking of wheel to rail - Anodized aluminum uprights.
- Finish: DEEP BLACK (100% black)
- Overall dimensions (WxD): 128 x 60 cm.
- Weight: 9.4 Kg.

Supplied with: 2 premium rails, 1 Bike-Block Pro S1 DEEP BLACK, 1 Bike-Block Pro S3 DEEP BLACK, Frame Kit for Fiat Ducato > 2006.

Features of KIT FRAME for Mercedes SPRINTER
- Reinforced attachment: use of vehicle hinges.
- Anodized aluminum frame.
- Finish: silver.
- Overall dimensions:
Carry Bike Frame: Width: 96 cm. Height: 136 cm.
- Weight: 10.8 Kg.

FIAMMA Code: 08753-02 Kit Frame Sprinter 02096-35A- Carry Bike Frame Deep Black

Not suitable for vehicles with 270° hinge system.
For mounting a 3rd bike: optional 1 Bike Block Pro 2 Deep Black arm and 1 Plus Deep Black rail.
Please note: the Carry Bike rack must be installed on the right-hand door of the vehicle, and the ladder on the left-hand door. The Bike Block arm frame mounting can be turned through 90°. Do not hesitate to rotate this bracket to adapt it to the position of the frame.
The License Plate Carrier Fiamma (available as an option) is recommended.

1 242,00 € ATI

Summary of product

€

Apport :

€

+ 2 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

€

Apport :

€

+ 3 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

Crédit d'une durée de 2 ou 3 mois sans assurance avec apports obligatoires, réservés aux particuliers. Sous réserve d'acceptation par Oney Bank. Vous disposez d'un délai de 14 jours pour renoncer à votre crédit. Oney Bank - SA au capital de 51 286 585 euros - 40 Avenue de Flandre 59170 Croix - RCS Lille Metropole - 546 380 197 - n° Orias 07 023 261 www.orias.fr

On order

ref : CP10895

Carry Bike Frame

1 242,00 € ATI

Learn more

Carry Bike Frame

Discover this new restyled 2023 version for the CARRY BIKE FRAME bike carrier for VW CRAFTER II series / MAN TGE (= 2017 - H3 / H4) after 2016. It is offered here with its KIT FRAME holder for VW CRAFTER II. Its sturdy stainless steel frame allows you to transport your bikes with complete peace of mind on your van. All you need to do is use the vehicle's original mounting points. In addition to its ease of installation, you'll benefit from other advantages:
- The rear door can be opened, even with bikes mounted on the carrier.
- 3 position levels for the rack structure (standard, intermediate or low) to facilitate bike mounting/dismounting.

Suitable for:
- 2 conventional (non-electric) bikes as standard and up to 3 bikes max. with optional accessories.
OR
- 2 electric E-Bikes max.
Enjoy classic styling in DEEP BLACK finish.

CARRY BIKE FRAME features:
- Rack can be used in 3 positions: standard, intermediate or low, for easy bike loading.
- The doors can be opened with the bike rack installed.
- Material resistance: anodized aluminum.
- Maximum load: bike rack: 50 Kg; rail: 15 Kg.
- Rail spacing: 15 cm.
- Vertical wheelbase: 168 cm.
- Installation safety: using vehicle hinges.
- Rack Holder : safety system for locking the rail-holder structure.
-Bike-Block: bike -blocking devices.
- Rail Plus: new design for greater resistance to torsion and bending.
- Quick Lock: fast, secure locking of the wheel to the rail - aluminum upright .
- Finish: Deep Black
- Overall dimensions (WxD): 128 x 60 cm.
- Weight: 9.4 Kg.

Supplied with: 2 premium DEEP BLACK rails, 1 Bike-Block Pro S1 DEEP BLACK, 1 Bike-Block Pro S3 DEEP BLACK,, Frame Kit for VW CRAFTER II after 2016

Features of the KIT FRAME bracket for VW CRAFTER II:
- Reinforced attachment: use of vehicle hinges.
- Aluminum frame.
- Finish: aluminium grey.
- Overall dimensions:
Carry Bike Frame: Width: 96 cm. Height: 136 cm.
- Weight: 10.8 Kg.

FIAMMA Ref: 08753-03 Kit Frame VW CRAFTER II 02096-35A- Carry Bike Frame DEEP BLACK

Not suitable for vehicles with 270° hinge system.
For mounting a 3rd bike: optional 1 Bike Block Pro 2 arm and 1 Plus rail.
Please note: the Carry Bike rack must be installed on the right-hand door of the vehicle, and the ladder on the left-hand door. The Bike Block arm's frame attachment can be turned through 90°. Do not hesitate to rotate this bracket to adapt it to the position of the frame.
The License Plate Carrier Fiamma (available as an option) is recommended.

1 242,00 € ATI

Summary of product

€

Apport :

€

+ 2 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

€

Apport :

€

+ 3 mensualités de :

€

Dont coût du financement : 0 €, TAEG : 0 %

Crédit d'une durée de 2 ou 3 mois sans assurance avec apports obligatoires, réservés aux particuliers. Sous réserve d'acceptation par Oney Bank. Vous disposez d'un délai de 14 jours pour renoncer à votre crédit. Oney Bank - SA au capital de 51 286 585 euros - 40 Avenue de Flandre 59170 Croix - RCS Lille Metropole - 546 380 197 - n° Orias 07 023 261 www.orias.fr

Available the 13/05/2024

ref : CW11554

Valve fitting for Roll Tank Fiamma

17,00 € ATI